Home  >  Multifunctional Materials

HPL Alu-honeycomb composite board - wed002

hpl honeycomb core - more info check here: //www.buildingsuppliesplaza.com/HPL-Alu-honeycomb-composite-board-10176235/

Quick Brief

Place of Origin: Jiangsu China (Mainland) Brand Name: weadell Model Number: wed002 colour: colourful

Product Features:

hpl honeycomb core

Business Terms:

Port: shanghai

Minimum Order Quantity: 100 Piece/Pieces

Supply Ability: 10000 Piece/Pieces per Week

Payment Terms: T/T

Contact Supplier
HPL Alu-honeycomb composite board
Share to: Facebook Twitter LinkedIn Google+

Product Packagings & Delivery Terms:

Specifications and Product Details:


ESACORE?AL ST is a lightweight sandwich panel based on aluminium ‘honeycomb’ core and aluminium skins with HPL laminate(s), its principle characteristics are the high mechanical performances, the excellent behaviour against fire, smoke and toxicity (fully compliant with ‘Maritime Equipment Directive’ (MED) 96/98/EC) and thanks to the use of ‘honeycomb’ core a very low weight; due to these characteristics it is particularly suitable for applications in interiors manufacturing in marine, railway and building markets with a finished surface ready to use.
ESACORE AL ST is normally supplied with finished laminate ( one side or both sides ) 0,9 mm thickness standard HPL from the wide range of colours and finishing from Abet Laminati.

Aluminium alloy : 3000 series
Honeycomb density : 2.6 lbs/ foot? ( 43 Kg/m?) - standard production
2.9 lbs/foot? (46 Kg/m?) – standard production
3.6 lbs/foot? ( 59 kg/m?) – standard production
Honeycomb cell size : Standard: 1/4 “ ( 6.35mm) -3/8" (9.52mm) – 1/2" (12.7mm)
Cell size is depending from the selected density
Other cell size available on request
Skin :
Aluminium sheet: 1050 – 1060 5005 – 5754 alloy
Thickness: 0,3 mm. – 0,5 mm – 1 mm. ( standard)
HPL : High pressure laminates
Thickness : 0,9 mm (standard ) other thickness on request and according to Abet Laminate production
Colour : more than 800 different colours and finishing are selectable from the standard production of Abet Laminati.

* Dimensions ( mm): 1200 x 2400 ; 1280 x 3000 ( standards)
Tolerance on dimensions?: ± 5 mm
* Flatness : ? 5 mm on 2400 mm
* Thickness : From 5 mm to 150 mm ± 0,3 mm

Esacore- AL ST ( 1/4" cell size – 3.6 lbs/foot? density – skin thk:0,5 mm)
6 mm
15 mm
Weight (Kg/sqm)
~ 5.5
~ 6.1
Max load (N)
> 650
> 1850
Deflection at 445 N (mm)
~ 12
~ 2
Impact Resistance

Mechanical tests performed at room temperature and according to MIL – STD - 401


- RINA Type Examination Certificate ( fully compliant MED 96/98/EC –‘wheelmark’)
- IMO Res. MSC 61 (67) – fire test procedure code for complete panel
- IMO Res. A 653 (16) – surface spread of flame for complete panel
- Non-combustible ISO 1182 - non-combustibility of core (honeycomb)


ESACORE – AL ST can be worked with standard tools ( cutting and drilling), taking attention for burrs during cut edges. Before to start further operations over the skins (painting or bonding) particular attention should be taken to clean the panel skins from any dust or grease presence. The panels should always stored in vertical or horizontal ( preferred) position until further reworks; if laminates have to be used to finish the panels, it has to be considered that during its operative life, the panel should not work in areas where different temperature and humidity levels are present on the two faces. Also the ‘cut and fold’ technique can be applied ( on the raw panel) to produce curved or bended parts ( contact Metalleido Components for more information)


As on most of materials when cutting operations are done, inhalation and eye contact should be avoid; for this reason, it’s strongly recommended use of suitable protective equipment (ear defenders, safety glasses, gloves..). Wash hands immediately after finishing works .

HPL Alu-honeycomb composite board suppliers    HPL Alu-honeycomb composite board manufacturers